Ceiling Fan with Lights Model No.
Contact Information Please contact us with the following information: 1. Screenshot of your order page, including product picture, name, and order ID number. 2. Problem details with pictures / short video if possible. Email: lightingcustomercare@gmail.com Scan for Online Installation Video Note: The product in the video may be different from this one.
Packing List A B C D E F G H Quantity Part A Mounting Bracket 1 G Remote Control 1 B Canopy 1 H Remote Holder 1 C Downrod Assembly 2 D Coupling Cover 1 E Downrod Hub 1 F Fan Assembly 1 Part Description Description Note: 1. The remote receiver is already assembled in the motor housing. 2. Other parts may be assembled together in the package.
Installation Kit AA DD BB EE CC FF Quantity Part Description AA Downrod Hub Screw BB Wire nut CC Pair of Gloves DD Clevis Pin & "R" Pin (assembled) EE Wood Screw (optional) FF Machine Screw & Washer for Outlet Box (spares) 6 3 1 1 Set 2 2 Note: Some extra hardware may be included. The quantity listed above is the number required for installation.
Safety Rules 1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock. 2. A qualified licensed electrician is required for the installation. 3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds.
Installation Preparation Tools You Need Ladder Pliers Screwdrivers Wire Strippers Drill Bit (optional) Power Drill (optional) If mounting to a support structure, you will also need the optional tools. What to Expect with Your Installation You may need a friend to help you. 30 inches from blade tip to nearest wall or obstruction Ceiling angles greater than 22° will require an Angled Mounting Kit.
Installation Step 1 (Assemble the Fan) NOTE: This ceiling fan comes with two downrods: 1. The short downrod is for "close-to and flat ceilings" installation (less than 9 feet). 2. The long downrod is for higher or angled ceilings less than 22°. 1. Attach the Downrod Hub Attach the downrod hub onto the fan assembly with the downrod hub screws provided as Fig.1. 2. Assemble the Fan Step 1. Remove the clevis pin and "R" pin from the downrod assembly. Fig. 1 Step 2.
Installation Step 2 (Mount the Bracket) Option 2 Option 1 Solid Wood Structure Outlet Box Bracket OR Bracket Machine Screw (from outlet box) Wood Screw Fig. 3 Option 1: With Outlet Box Fix the mounting bracket onto the outlet box with screws from the outlet box. Option 2: Without Outlet Box Fix the mounting bracket onto the solid wood structure with 2 wood screws.
Installation Step 3 (Hang and Wire) Fixation Slot Tab Fig. 4 1. Hang the Fan Lift the downrod into the mounting bracket. Rotate the downrod until the tab in the mounting bracket is seated in the fixation slot in the downrod ball (Fig. 4). 2. Wire the Fan Connect the wires from the fixture to the house supply wires with wire nuts, ground wire (green, green/yellow, or bare copper) to ground wire, neutral wire (white or blue) to neutral wire, and hot wire (black or brown) to the hot wire.
Installation Step 4 (Fix the Canopy and Install the Bulbs) Coupling Cover Canopy Step 1. Slide the coupling cover downward to cover the downrod hub. Step 2. Slide the canopy up to the ceiling and attach it to the mounting bracket with the screws provided. Tighten all screws securely. Step 3. Install light bulbs (E12 x 4, Max 40W each, LED recommended) Note: Please adjust the light arms to make sure there is enough space between the bulbs and the blades. Installation Step 5 (Install the Remote Holder) 1.
Remote Control Instructions ① ⑥ ② ⑦ ⑧ ⑨ ③ ⑩ ④ ⑪ ⑫ ⑤ ⑬ ⑭ ⑮ NOTE: Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included) ①: Turn off the fan and lights. ②⑦: "F" refers forward fan direction."R" refers reverse the fan. ③④⑨⑩⑫⑬: 1/2/3/4/5/6 for fan speeds. ⑤⑭⑮: 1H/2H/4H for timing the fan. ⑥: Turn on/off the lights. ⑧: Natural wind of the fan, fan speed will change automatically when using this function. ⑪: Turn off the fan.
Trouble Shooting 1. Fan doesn't work • Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch. • Check the remote control battery (not included in this package). • Check the circuit breaker to ensure the power is on. • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram. 2. Lights Do Not Light Up / Flicker / Noisy Operation • Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.
