Datasheet

TECHNICAL DATASHEET
Silica Gel Desiccant
Silica gel is a transparent spheroidal particle. The main
component is SiO2. Because of the large surface area,
silica gel has a high moisture absorption rate. Silica
gel can be reactivated without aecting its moisture
absorption capacity. It is therefore very economical.
3090011SI  SILICA GEL DESICCANT | 15 AUGUST 2022 3:56 PM V1
PRODUCT
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Informa-
tion supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
ITEM/CONDITION STANDARD
Moisture absorption capacity
(T=25 ±2
o
C)
RH=20±2% ≥9.5%
RH=50±2% ≥22.0%
RH=90±2% ≥33.0%
IPH 4~8
Specific Resistance ≥3000.cm
Granularity Percent of Pass% ≥90%
Bulk Density g/L ≥750
Silica gel desiccant must always be kept in airtight containers to avoid moisture absorbtion.
TECHNICAL SPECIFICATION