Datasheet

TECHNICAL DATASHEET
1460077  ESD DRINKING BOTTLE | 11 MAY 2022 11:30 AM V1
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Informa-
tion supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
ESD Drinking Bottle
PRODUCT
These moulded polyethylene bottles utilise a
concentrate that does not contain any Ethoxylated
Tertiary Amine, which is widely used as an antistatic
agent.
These ESD safe bottles have an average surface
resistivity of 10
9
to 10
10
Ohms/square and do not have
any less desirable features associated with surfactant
laden material.
These bottles will dissipate a static charge of ±5000V
in less than 2 seconds at 40% relative humidity. By
their chemical nature, they will not have any chemical
reactivity with solvents as TCE or alcohol.
PRODUCT CODE DESCRIPTION SIZE (oz) NOTES
146-0077 ESD Drinking Bottle 32 Each