Datasheet

TEST RESULTS
TEST METHOD UNIT VALUE
Surface Resistance / R

SJ/T10694-2004 Ohms 1x10 ≤ R ≤ 1x10
Bottom Resistance / R

SJ/T10694-2004 Ohms 1x10 ≤ R ≤ 1x10
Volume Resistance GB/T14437-97 Ohms 1x10 ≤ R ≤ 1x10
Thickness YY-1001 mm Permissable Tolerance +0.1
Temperature Resistance YY-1001 ºC 180 (Instantaneous Temp)
Temperature N/A ºC 20-26
Relative Humidity N/A % 40-65
TECHNICAL DATASHEET
0820043  ESD BENCH MATTING  2 LAYER  SMOOTH FINISH | 3 MAY 2022 1:08 PM V1
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Informa-
tion supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
R

is the resistance from one point on the mat’s surface to the mat’s ground point, and is the
fundamental electrical test for a mat. A proper R

insures that a mat can conduct charge from a
point on the surface to the mat ground point. The guideline in ESD STM-4.1 for RTG is 1x10 to 1x10
Ohms. ANSI/ESD S-20.20 has an upper limit of <1 x10 Ohms.
R

is the resistance from one point on the mat’s surface to another point. A proper R

insures the
consistency of the mat’s resistance properties. The ESD STM-4.1 guideline for R

is >1x10 Ohms.
PRODUCT CODE DESCRIPTION SIZE METRIC COLOUR
082-0044 ESD Bench Matting - 2 Layer, Smooth Finish 1.2m x 10m (roll) Blue
082-0070 ESD Bench Matting - 2 Layer, Smooth Finish 600mm x 1.2m Blue
082-0056 ESD Bench Matting - 2 Layer, Smooth Finish 1.2m x 10m (roll) Green
082-0072 ESD Bench Matting - 2 Layer, Smooth Finish 600mm x 10m Green
082-0043 ESD Bench Matting - 2 Layer, Smooth Finish 1.2m x 10m (roll) Grey
082-0074 ESD Bench Matting - 2 Layer, Smooth Finish 600mm x 10m Grey