Datasheet

TM
ESD & PRODUCTION CONSUMABLES
ESD & PRODUCTION CONSUMABLES
TECHNICAL DATASHEET
0030001 V1 | 10 FEBRUARY 2021 12:20 PM V1
IMPORTANT: This data sheet and its contents (the “Information”) belong to Integrity Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products
to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be
accurate but Integrity Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information
and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including
liability resulting from negligence or where Integrity Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity Cleanroom.
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
COMPONENT TEST METHOD VALUE
Film composition N/A LDPE
Film thickness Micron Meter 3 mil 75 micron (+/-8%) (where applicable)
Melt index N/A 2.1 g/10min
Surface resistancy ANSI/ESD S11.11. >10 Ohms/sq <10 Ohms
Water absoption rate N/A 0.5%
Density N/A 0.92 g/cm
Tensile strength N/A MD:32.01 MPa
TD: 33.75 MPa ISO/DP 5629/1 0.25
Breaking elongation
rate
N/A MD: 1200%
TD: 685%
Static dissipation FTMS 101C Method 4046 <2 seconds
Appearance N/A Transucent sheet (no powder and oil)
Size N/A
Thickness: +10%
Length: +3mm
Width: +3mm
Tear strength TD ISO 6383-2 20kN/m
Tear strength MD ISO 6383-2 50 kN/m
Tensile test film ISO 527-3
Stress at break TD 18Mpa
Stress as break MD 30Mpa
Strain at break TD > 500%
Strain at break MD > 100%
Modulus of elasticity
MD
190 MPa
Coecient of friction ASTM D 1894 0.2
0
TECHNICAL DATASHEET
[e-mail] or visit www.antistat.co.uk
TECHNICAL SPECIFICATION
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information
supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.