Datasheet

TM
ESD & PRODUCTION CONSUMABLES
ESD & PRODUCTION CONSUMABLES
TECHNICAL DATASHEET
0030001 V1 | 10 FEBRUARY 2021 12:20 PM V1
IMPORTANT: This data sheet and its contents (the “Information”) belong to Integrity Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products
to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be
accurate but Integrity Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information
and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including
liability resulting from negligence or where Integrity Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity Cleanroom.
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
Pink reclosable antistatic bag
ANT003PAB
Antistatic bags or static dissipative bags are used to pack
non ESD sensitive items destined for use in an EPA.
PRODUCT
• Our pink antistatic bags are formed using blow
moulded polyethylene with antistatic additives
• Soft texture and flexible
• Surface resistance of <10 Ohms
FEATURES
NOTES
Pink antistatic bags have the ability to dissipate a
static charge to the ground preventing static charge
building up on the package or device. The material
is also antistatic and will not generate a charge when
rubbed against other materials. These bags have no
shielding ability. A static field or discharge occurring
outside the bag could penetrate the bag and damage
electronics inside.
1) CONFIGURATION(S)
Our bags are available in custom sizes or in several
industry standard sizes. Bags are oered with a
single seal or bottom fold, blow moulded. The bags
are provided with our standard artwork or your
company’s flexographically printed logo (minimum
order quantities apply).
2) STANDARD BAG ARTWORK
Our pink antistatic bags are produced with the artwork
shown as standard. For further information on bespoke/
printed orders, please contact one of our sales team.
0
TECHNICAL DATASHEET
[e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information
supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.