Datasheet

TM
ESD & PRODUCTION CONSUMABLES
ESD & PRODUCTION CONSUMABLES
TECHNICAL DATASHEET
0010001  UK  PINK ANTISTATIC BAG  OPEN TOP | 14 JANUARY 2022 10:22 AM V1
IMPORTANT: This data sheet and its contents (the “Information”) belong to Integrity Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products
to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be
accurate but Integrity Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information
and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including
liability resulting from negligence or where Integrity Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity Cleanroom.
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
COMPONENT TEST METHOD VALUE
Film composition N/A LDPE
Film thickness Micron Metre 3 Mil 75 micron (+/-8%) (where applicable)
Surface resistivity ANSI/ESD S11.11. 10 - 10 Ohms/sq
Density ASTM D882 0.92 g/cm
Tensile strengh ASTM D882
MD: 32.01 MPa
TD 33.75 MPa
Breaking elongation rate ASTM D882
MD: 1200%
TD 685%
Static dissipation FTMS 101C Method 4046 <2 seconds
Appearance N/A Translucent Sheet (no powder and oil)
Size N/A
Thickness: +10%
Length: +3mm
Width: +3mm
RoHS COMPLIANCE
• All of Antistat’s products are RoHS 3 and REACH compliant
• Amine free
• Non corrosive
• Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance
0
TECHNICAL DATASHEET
[e-mail] or visit www.antistat.co.uk
NOTES
Supports EN 61340-5-1 and can be used as part of an ANSI/ESD S20.20 programme
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the
products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information
supplied is believed to be accurate but Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should
check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.