Specifications

EN 5008 8-in-1 MPEG-4 AVC/H.264 HD User’s Manual
28 / 43
Antik Technology / www.antiktech.com
This device supports 1 MPTS (Multiple Programs Transport Stream) and 8 SPTS (Single
Programs Transport Stream) output. User can click to triger a pull-down list to select the
output type.
 Output Port
To set the output port by modifying the value in this field.
 Original Network ID
This 16-bit field gives the label identifying the network ID of the originating delivery system.
The value ranges from 0 to 0xFFFF.
 Transport Stream ID
This is a 16-bit field which serves as a label for identification of this TS from any other
multiplex within the delivery system. The value ranges from 0 to 0xFFFF.
 Output Bit Rate (Mbps)
This includes the effective bit-rate of encoding channel 1-8, the effective bit-rate from ASI
input and the bit-rate of stuffed null packets.
 UDP Stream TS Package
Users can set the amount of TS packages here.
 NIT Insertion
In this field, users can decide whether to effect the NIT (Network Information Table) insertion
function.
 SDT Insertion
In this field, users can decide whether to effect the SDT insertion function.
 MPTS Filter Null Packet
If this function is effected, then the null packets in IP output stream will be filtered.
 PSI/SI Editor
This button will trigger the PSI/SI Editor for some users’ advanced usage. For more detail,
please refer to the manual of PSI/SI.
4.3.1.2 Video Parameters (Parameters->Channel->CH0X)