Specifications

EN 5008 8-in-1 MPEG-4 AVC/H.264 HD User’s Manual
17 / 43
Antik Technology / www.antiktech.com
► 2.1 Parse ASI Prog
3.2.3 Output Setting
By press the enter key in the main editing interface, use can set the device output parameter.
The device will display the following page after users pressing the enter key.
3.2.3.1 IP Out Enable
This is the new function of this encoder, user can decide whether to open the IP output function
by press the ENTER key in this menu, and the operating interface will show the following
page:
► 3.1 IP out Enable
[ YES] NO
3.2.3.2 IP Out Address
If users enable the IP output function, then users can set the device IP output address in this
interface. After users press the ENTER key, the operating interface will display the following
page:
► 3.2 IP Out Address
224.002.002.002
2.1 Parse ASI Prog Prog: 006 Out: 003
► 001 HK1 √ 002 HK2 X
► 3.1 IP Out Enable 3.2 IP Out Address
3.3 IP Out Port 3.4 Trans Stream ID
► 3.5 Output Stream 3.6 ASI Output
3.7 UTC Time Config 3.8 Null PKT
► 3.9 TS Package Num