User manual

Užívateľská príručka / User manual – ATK VoIP-202
66
7. FAQ
7.1 The gateway can’t assign WAN or LAN IP
When the gateway is in the NAT mode (no bridge mode), please don’t
assign the WAN and LAN IP with the same net segment e.g., if the LAN IP
address is 192.168.1.X, don’t set the WAN address in the same segment
of 192.168.1.X
7.2 After configure the WAN static IP, why it return to
the primary IP when confirm the modified local IP
The cause may be that the WAN and LAN are in the same net segment.
Try to change the LAN IP address to the other segment.
7.3 Why can’t log in gateway by Telnet
Maybe because of the private address in the gateway and PC, but the two
IP address aren’t in the same net segment, e.g. the gateway uses the
address 192.168.1.179, the PC uses the address 192.168.10.180, try to
add a IP 192.168.1.xx for PC
7.5 Why does it encounter busy tone when pick up
phone?
Our new edition ATK VoIP-202 gateway add line ditection function, when
not any account is registered or without connecting with PSTN line,
gateway will suggest a busy tone prompt to warn that users cannot make
calls normally.