User manual

Užívateľská príručka / User manual – ATK VoIP-202
61
4. How to use
After gateway register successfully we can make phone call
4.1 Dial number
• Dial VOIP number according to dial peer, for example: code +
telephone, 0 + mobile number, end up with “#”
• Use lifeline to dial the PSTN number, press “*” first and transfer to
the lifeline, after hear the dialing tone, then dial the PSTN
number.
• Dial IP address, for example, you can press #192*168*1*179# to
dial IP address 192.168.1.179.
4.2 Call transfer: blind transfer, attend transfer
4.2.1 blind transfer
• Press “Flash+*+B’s number” to transfer the call from A directly.
4.2.2 attend transfer
• Press “Flash” or “forked spring” to lock the call with temperarily, then
call me to attend and ask whether to anser A’s incoming call.
Middleman can hang up directly to finish the call transfer. So B now
can talk with A. If B say no, just press “Flash” or “forked spring” to
switch the call back and talk with A again.
4.3 Three way call
When calling A, press” Flash” to lock the calling with A, then call B, after
putting through with B, press “Flash” again and turn back the calling with
A, at last press”*” to complete the three way call.