User manual

Užívateľská príručka / User manual – ATK VoIP-202

IAX register refresh time

Enable or disable register to the server

Set IAX2 as the default protocol. That

means if choose this option, user picks up and dial number, it will be

communicated through IAX2 protocol. The default of gateway is SIP

protocol; this configuration it means when you make a phone call, the

receiver wouldn’t be affected. If user configures this item, it won’t be

used SIP, but IAX, if user wants to give a call by SIP simultaneously, then

can configure the function of prefix substitution in the item of Dial peer

and achieve the SIP call.

Enable / disable to G729 (using G729 speech

coding mandatory consultations)

3.3 Save and clear the configuration

Enter into WEB page, “Config Manage->Save Confi to save the

configuration

Enter into WEB page, Config Manage->Clear Confi to clear the

configuration, come back to default configuration.