User manual

Užívateľská príručka / User manual – ATK VoIP-202

Configured enable/disable register.

Successfully register when you select “Enable”.

Support SIP prack function or not. Advise to

use default configuration, the configure should guide by the professional

technician.

Support Signal Encrypt function or not

Support RTP Encrypt function or not

Whether let the gateway

support and register to take authentication to send directly, in this way

the devices does not need to do the authentication with the server each

time any more, server receives register request with Authentication then

will directly send back the confirmative message;

Support RFC4028 or not

Configure SIP protocol as default or not

Note: After the aforesaid Network and VoIP configuration, if the register

is successfully, the REG light will be on( if the light is flittering

continuously, it means the registration unsuccessfully), the user can be

able to make VoIP calls through the register and proxy, with # after