User manual

Užívateľská príručka / User manual – ATK VoIP-202
49
3．
．．
．Configuration with Web
3.1 Get the gateway IP address
The gateway has two ports: WAN and LAN, both of them has been set to
the default DHCP mode. User can configure the gateway through the
WAN IP and LAN IP according the network they using.
• If your network supports the DHCP to distribute IP address
automatically, after connecting the gateway, you will see the
indicator light of the WAN port is on and stop glittering, it means
you get the IP address already, you can be set up quickly
according to the following operation: after connecting Ethernet
cable to WAN port, connect PSTN phone to FXS port, press
#*111#, you could hear IP address of gateway WAN port, input
the WAN IP address on the browser, you can configure the
gateway.( To know more details , please see the advanced
manual)
3.2 Configuration with Web
The web configuration interface mainly consists of the configuration
menu on the left and configuration interface on the right, enter the
corresponding configuration interface to configure by selecting the menu,
please see as below: