User manual

Užívateľská príručka / User manual – ATK VoIP-202
48
• Insert the RJ-45 Ethernet Cable to WAN port on the gateway, ensure
the gateway connects into the internet
• For the LAN port, you can connect it to the PC
• Connect a phone cable between the PSTN and the PSTN port on the
gateway as the lifeline.
• Use a RJ11 phone cable to connect between the phone and the
PHONE port on the gateway.
• Insert the 12V/1A power adapter
2.3 Display and status indicators
WAN: WAN port indicator LED. When lit this LED indicates that the
connection between the Gateway and WAN has been satisfied.
LAN: LAN port indicator LED. When lit this LED indicates that the
connection between the Gateway and LAN has been satisfied.
PHONE: Phone status LED. The LED lit when the handset has been picked
up or it turns off when the handset has been hanged up.
REG: Register indicator LED. A continuously lit LED indicates the resister
has been success. A flashing LED warns the resistor has been failed.
POWER: Power supply indicator LED. This LED indicates that the Power for
the gateway is available.