SDS

Specification And MSDS Sheet
www.AnticoElements.com - [e-mail]
Toll Free: 877-326-8426 - 877-3-NTICO
Antico Elements
Architectural Products
Identification Of The Substance & Company
Architectural products - Imitation stone wall panels, decorative stone molding and columns. Self curing two-component urethane, Isocyanate and Polyol
Manufactured & distributed by: Antico Elements LLC - 3520 NW 46Th Street Unit 4, Miami FL, 33142
AnticoElements.com - [e-mail] - 305-602-0333
Typical Physical Properties:
Density 18 pounds / Cubic Foot.
Comprehensive Strength = 800 PSI
Tensile Strength = 700 PSI
Elastic Modulus = 18,000 PSI
Shear Strength = 390 PSI
Shear Modulus = 4,500 PSI
Flexural Strength = 1,200 PSI
Flexural Modulus = 40,000 PS
Treated with UV inhibitor agents.
Fire Rating: Option available upon request - ASTM E84-90, ANSI 2.5, UBC 42-1, NFPA 255, UL 723 Type-A Fire Test
Results: Flame spread index: 20 - Smoke development index: 225
Hazards identification:
Classification of substance: Solidified and cured urethane, Isocyanate and Polyol
Possible Hazards:
Eye: Solids or dust may cause irritation or injury from mechanical action, like sand or dirt No vapors present at normal temperatures. Vapors may be produced if
subject to elevated temperatures above 450F / 323C.
Skin: The inherited physical properties do not allow skin absorption. Irritation may occur from persistent mechanical friction or molten state.
Ingestion: No effect from single dose. Overexposure may have adverse effects.
Inhale: Upper-respiratory organ may experience irritation due to over-exposure to solid dusts. Vapor production is unlikely at normal temperatures.
First aid measures:
Ingest: Contact medical doctor for excessive exposure. Very unlikely.
Eyes: Rinse repeatedly with clean water. Avoid pressure of eyelids.
Skin: Wash off. If burn from occurs from misuse of material and not-recommended exposure of material to high temperatures contact medical doctor.
Inhale: No effect from limited amount. For prolonged exposure consult medical doctor immediately.
Fire fighting measures:
Extinguishing Media: Water, Carbon Dioxide or Dry Chemicals, sand.
Procedures: Use NIOSH / OSHA approved full protective gear. If equipment is not available fight fire from protected location or safe distance.
Accidental Release Measures:
Dust particles or beads may create slipping hazards. Solid spills should be promptly collected.
Cleanup: Sweep up or vacuum.
Neutralizing agents: None specified.
Handling and Storage:
Precautions: Average level of housekeeping suggested, controlling of dust are necessary for safe handling of product packaged or otherwise.
Handling and Storage:
Precautions: Average level of housekeeping suggested, controlling of dust are necessary for safe handling of product packaged or otherwise.
ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
Exposure Controls/Personal Protection
Respiratory Protection: In presence of dust use NIOSH / OSHA-Rated dust masks although in most and routine conditions they are not necessary.
Exposure to high heat: Although not recommended the exposure to temperatures higher than 190F / 88C, in such cases use a Niosh-approved respirator.
Ventilation: In most cases general ventilation provided by exhaust fans is sufficient
Eye Protection: ANSI approved chemical workers goggles
Submittal
Product advantage list, description, product samples, available colors, product drawing, warranty information, installation advantage and instructions.