Installation Instructions

ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
Installation Instructions for Antico Stone Panels
Page 7
Now place the corner over the last panel and, with a marker, trace the "fingers" of the corner over the panel.
Using a jig saw create the fingers on the panel to match those of the corner. Some filing and sanding will be necessary to create a snug fit.
Try to cut on or inside the marked lines to avoid gaps. In some cases it may be necessary to remove the flat "lip" on the panel or corner
that is not getting cut, to create a flat and even seam.
Feel free to request additions and modification to these instructions. Send us a comment by e-mailing us at [e-mail].
Thank you so much for choosing Antico Elements !!
Now you may install the corner and continue the installation of the next wall. If no corner is used to the right side of the wall, you may use
our Trim Sill to end the installation.
Some caulking may be needed to make the joint between panels and corners more seamless. We offer Touch-Up Kits if you wish to paint
the caulking to completely match the color of the panels.
Enjoy!