Installation Instructions

ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
Installation Instructions for Antico Stone Panels
Page 4
Install the Top Sills in the correct direction making sure to locate the unfinished edge and placing it against the wall. The bottom front
edge should be the finished one. If the sill isn't touching the wall it should be turned around. To create a better seam between two sill
pieces that merge at an angle, the sills should be mitered where they meet at the corners.
In most cases caulking the seams shouldn't be needed but you can apply any exterior grade caulk and use our Touch-Up Kit to match the
stone colors.
Here is the great and rewarding finished look
How To Treat Exposed Edges
In some cases the panels may need to be cut before they reach another wall or a corner, therefore the raw material becomes exposed.
In these scenarios you have a few options:
1- Use our Trim Sill as a trim to cover the edges, or
2- Shape the exposed edge and touch them up, or
3- Create a return with the panels itself.
More Instructions In The Next Page