Installation Instructions

ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
Installation Instructions for Antico Stone Panels
Page 3
Continue until all the rows of panels have been installed in a straight line.
Mark the height of the corner at the same level as the top stone of the panel, not the top lip (see photo below).
Remove the corner and cut it to that mark. Apply some adhesive in the back of the corner and secure it back in place.
If you are not using our corners but you are mitering the ends of the panels to create a corner, please refer to the How To Create A
Mitered Corner instructions.
If you plan to use our INTERLOCKING Outside Corners please refer to the related instructions at the bottom of this page. These
interlocking corners are very convenient but not required.
Install the rest of the panels on the opposite side of the corner the same way you did above