Installation Instructions

ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
Installation Instructions for Antico Stone Panels
Page 2
We recommend that you install the panels from left to right (for the Laguna panels it would be right to left). For better results mark some
horizontal chalk lines on the wall to keep your panels leveled.
Position the panels so that the horizontal 3/4" high lip is at the top and the horizontal notch, located in the back of the panels, at the
bottom.
The left side of the first panel ( the one with the open lips) should be trimmed, removing the fingers and creating a straight edge. Apply a
few lines of adhesive in the back and where the panels overlap / interlock with each other and fasten the panel to the wall using screws or
nails. We suggest using at least 8-10 screws per panel.
Continue with the rest of the panels of the first row. Trim the right end of the last panel (for the Laguna it would be the left end) to fit
against the wall corner. It is always better to mark your dimensions in the back of the panels.
If installing multiple rows of panels, we strongly advice to cut the first panel of the next row in half, and use the half with the straight lip.
This is needed to stagger the vertical seams. ( This doesn't apply for Castello and Corallo Panels )