User's Manual

2020.04.14
TP, rev1
Side 4 af 4
The Smart Connect Mini must not be installed more than 2 meters above ground. Do not use
another power supply than the one provided with the Smart Connect Mini. Use of any other power
supply could damage the product or make it operate in an unforeseen manner.
Troubleshooting
• If the Smart Connect Mini shows a red light, it can’t connect to the backend system. Check
that the device has been created in Smart Device Tool or relocate to a position with better
cellular coverage.
• If there are problems installing one or more Smart Clima sensors, investigate using Smart
Device Tool which sensors did not connect: Either relocate them or adjust the installation by
adding an extra sensor to solve the problem.
• If the Smart Clima still does not install, try to factory reset the unit by pressing and holding
the button and await red, green and yellow flashes. Afterwards, you can try to install the
sensor again