User's Manual

ManualsBrandsAnticimex Innovation Center ManualsElectronicsLeak detection, relative humidity and temperature sersor

2020.04.14

TP, rev1

Side 1 af 4

Smart Clima user manual

Compliance statement Smart Clima

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Information to user

The FCC identification number: FCC ID: 2AOFP-E0054.

Caution: any changes or modifications not expressly approved by Anticimex Innovation Center A/S

will void the user’s authority to operate the equipment.

The Smart Clima are in compliance with the requirement for RF exposure in US with 20 cm

separation distance between the user and/or bystander of the device.

The latest version of the manuals and datasheets are always available on

anticimexonline.sharepoint.com

The antenna is fixed to the device and no change in antenna or fixation of the antenna is acceptable

and such modification is considered to violate the Compliance Statement

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the

following two conditions:

1. This device may not cause interference; and

2. This device must accept any interference, including interference that may cause undesired

operation of the device. This device should be installed and operated with minimum distance

of 20 cm from the human body.

Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

Summary of content (4 pages)

PAGE 1
2020.04.14 TP, rev1 Smart Clima user manual Compliance statement Smart Clima This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to user The FCC identification number: FCC ID: 2AOFP-E0054.
PAGE 2
020.04.14 TP, rev1 1. L’appareil ne doit pas produire de brouillage, et 2. L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d’en compromettre le fonctionnement. The Smart Clima communicates using the following free SRD frequency bands; EU: 868 – 868.6 MHz with a maximum transmitting power of 11 dBm. Rest of the world: 917 – 926 MHz with a maximum transmitting power of 14 dBm.
PAGE 3
2020.04.14 TP, rev1 - Consult the dealer or an experienced radio/TV technician for help. Instructions Only Anticimex service technicians are allowed to install, replace damaged units, and service installations. Replace the Smart Clima if the device is faulty. To install the Smart Clima system the operator must possess a mobile device such as a smartphone or tablet with access to an internet connection. To install, the operator should have a user in the Anticimex-owned software system “Smart Device Tool”.
PAGE 4
2020.04.14 TP, rev1 The Smart Connect Mini must not be installed more than 2 meters above ground. Do not use another power supply than the one provided with the Smart Connect Mini. Use of any other power supply could damage the product or make it operate in an unforeseen manner. Troubleshooting • If the Smart Connect Mini shows a red light, it can’t connect to the backend system. Check that the device has been created in Smart Device Tool or relocate to a position with better cellular coverage.