Integration Guide

13/15
29.10.2019
Anticimex Innovation Center A/S
Skovgaardsvej 25
3200 Helsinge, Denmark
Phone [phone], [e-mail]
anticimex.com/innovationcenter
Reg no. DK30350766
Registered office:
Helsinge
Integration instructions
Label requirements
If the FCC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display a
label referring to the enclosed module, Contains FCC ID: 2AOFP-E0048
Allowed operating frequencies;
917-926MHz (center frequency) for the US
868.3MHz (center frequency) for the EU
Other
Co-location of this module with other transmitters that operate simultaneously are required
to be evaluated using the FCC multi-transmitter procedures.
The host integrator must follow the integration instructions provided in this document and
ensure that the composite-system end product complies with the FCC requirements by a
technical assessment or evaluation to the FCC rules and to KDB Publication 996369.
The module antenna must be installed to meet the RF exposure compliance separation
distance of “20 cm” and any additional testing and authorization process as required.
The host integrator installing this module into their product must ensure that the final
composite product complies with the FCC requirements by a technical assessment or