Datasheet

1. Carl's Table – CPU Holder 1. eNook – Shelves 6. Adjustable Laptop Cart –
Shelves
2. Adjustable Laptop Cart –
Document Stand
1. Adjustable Laptop Cart –
Chairs
Add a second CPU to your Carl's Table with this metal bracket.
Mounts underneath a shelf. CPU rests in sturdy steel carriage.
Adjusts to hold CPUs 7" – 10" wide and 12" – 22" tall. Overall
width is 3.5" plus the width of your CPU. Height is 4.5" plus
the height of your CPU. Shown on pages 74 and 75.
Color: Silver Metallic (SM)
Part #: 367SM
Metal shelves to hold your cell phones,
PDAs, digital cameras and other small
gadgets. Includes cord clips to manage your
cables and connect shelves together. eNook
can hold up to four shelves. Remember to
leave room to store your laptop. Each shelf
is 13"w x 5 1/2"h x 5"d and holds up to 5 lbs.
Shown on pages 18, 78 and 79.
Color: Silver Metallic (SM)
Part #: 336SM
A. Shelf – Back
Give yourself more room to spread out by attaching this
Back Shelf to the Cart’s top shelf. When installed, creates
a 26" x 25.5" top surface. Route cables through opening
slit between shelves to keep everything tidy.
Shown on page 80.
Color: Silver Metallic (SM) metal with Black (BK),
Bluestone (BS) or Fog (FG) laminate
Part #: 591SM/BK, 591SM/BS, 591SM/FG
B. Shelf – Lower
Put your small printer or other equipment on this
Lower Shelf. Quickly mounts anywhere along the
trunk with just a few screws. Shown on page 80.
Color: Silver Metallic (SM) metal with Black (BK),
Bluestone (BS) or Fog (FG) laminate
Part #: 592SM/BK, 592SM/BS, 592SM/FG
B. Super Chair
The Super chair moves forward and backward. The seat
back is taller than the “Basic” chair, a separate control
slides the seat pad front to back, includes separate angle
adjustment and the T-arms adjust up and down, in and
out. Supports 300 lbs. Shown on pages 25, 27, 29 and 76.
Color: Black (BK)
Part #: 902BK
Compatibility: All Anthro Families
C. Deluxe Chair
All the features of the “Super” chair, plus an even higher
seat back with a padded, height-adjustable head rest. The
padded T-arms adjust up and down, in and out, and pivot
to allow easy access. Supports 300 lbs. Shown on
pages 28, 70 and 76.
Color: Black (BK)
Part #: 903BK
Compatibility: All Anthro Families
D. Verté
®
Chair
This is state-of-the-art ergonomics in seating. A series of
11 torsion spring-loaded bearing joints conform to your
exact spine impression, which you can then lock into place.
This chair is also about comfort. Three built-in levers control
the chair’s overall height and tilt. With the gel-filled full
grain leather seat, padded two-way adjustable head rest,
and adjustable and removeable padded T-arms, you won’t
want to get up. Supports 275 lbs. Shown on pages 33 and 77.
Color: Black (BK)
Part #: 904BK
Compatibility: All Anthro Families
2. Carl's Table – Chairs
A. Basic Chair
The seat angles forward and backward, and the padded
T-arms adjust up and down. The back features separate
height and angle adjustments. Supports 300 lbs.
Shown on pages 26 and 76.
Color: Black (BK)
Part #: 901BK
Compatibility: All Anthro Families
Raises your documents and manuals to a preferred viewing
height. Comes with 10" gooseneck so you can find a position
that works for you. Lip is 2" deep to securely hold your items.
Clamps onto the edge of your Cart with a C-clamp. Measures
14.25"w x 11"h. Shown on pages 24, 34 and 51.
Color: Black (BK), Silver Metallic (SM)
Part #: 440BK, 440SM
3. Adjustable Laptop Cart –
Equipment Hold-down
Secure your equipment to a shelf with this handy kit.
First, attach an adhesive-backed buckle to one side of
your equipment and another to the shelf, then feed the
included strap through the buckles to secure. Kit includes
four adhesive-backed buckles, two 8" Polypropylene straps
and two alcohol pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
4. Adjustable Laptop Cart –
Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart with this
metal swivel-head mount. Choose single-monitor or
dual-monitor design. The single-monitor version supports
up to 22 lbs. The dual-monitor version supports a total of
22 lbs. and two monitors up to 17" across. The heavy-duty
dual-monitor version supports up to two monitors
(20" across) and a total of 44 lbs. It is 22" wide with
mounting points in 1" increments. The Mount elevates
the center of the monitor 13" above the shelf. Install by
drilling through the shelf and secure with four bolts.
Conforms to VESA 75mm and 100mm mounting
standards. Shown on pages 10, 19 and 86.
Color: Black (BK), Silver Metallic (SM)
Part #: Single – 615BK, 615SM
Dual – 617BK, 617SM
Heavy-Duty Dual – 627BK, 627SM
5. Adjustable Laptop Cart –
Mouse – Swing-out
Keep your mouse handy with this roomy (8"w x 9"d) swivel
shelf. It rotates 360° so the mouse stows away under the
shelf when not in use. Made of steel phenolic. Attaches
with four screws. Shown on pages 86 and 87.
Color: Neutral Black Granite
Part #: 687BK
1. SpacePal Cart –
CPU Siderack with Caster
Mount your CPU on the side with our new SideRack. It
opens to accept your CPU, then closes tight to hug it
securely. Lifts your CPU approximately 7" above the floor.
Adjusts to fit CPUs from 4.5"w to 10"w. Add 2.75" to the
width of your CPU to determine how far the SideRack will
extend from the side of the Cart. Comes with 1 caster.
Specify if you plan to use a 4" or 5" Caster. Holds up to
100 lbs. Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: 564BL, 564GP, 564GB, 564IN,
564RU, 564SA, 564SM, 564TN
2. SpacePal Cart – Document Tray
Raises your documents to the most comfy viewing
position. Pivot the document tray for the best angle.
The lip supports documents 1.75" thick. Mounts to any
leg or can stand alone on the surface. Measures
13"h x 13"w. Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: DTBL, DTGP, DTGB, DTIN, DTRU, DTSA, DTSM, DTTN
Q U I C K
S H I P
B. Super Chair
The Super chair moves forward and backward.
The seat back is taller than the “Basic” chair,
a separate control slides the seat pad front to
back, includes separate angle adjustment and
the T-arms adjust up and down, in and out.
Supports 300 lbs. Shown on pages 25,
27, 29 and 76.
Color: Black (BK)
Part #: 902BK
Compatibility: All Anthro Families
C. Deluxe Chair
All the features of the “Super” chair, plus an
even higher seat back with a padded, height-
adjustable head rest. The padded T-arms
adjust up and down, in and out, and pivot to
allow easy access. Supports 300 lbs. Shown on
pages 28, 70 and 76.
Color: Black (BK)
Part #: 903BK
Compatibility: All Anthro Families
D. Verté
®
Chair
This is state-of-the-art ergonomics in seating.
A series of 11 torsion spring-loaded bearing
joints conform to your exact spine impression,
which you can then lock into place. This chair
is also about comfort. Three built-in levers
control the chair’s overall height and tilt. With
the gel-filled full grain leather seat, padded
two-way adjustable head rest, and adjustable
and removeable padded T-arms, you won’t
want to get up. Supports 275 lbs. Shown on
pages 33 and 77.
Color: Black (BK)
Part #: 904BK
Compatibility: All Anthro Families
A. Basic Chair
The seat angles forward and backward,
and the padded T-arms adjust up and down.
The back features separate height and angle
adjustments. Supports 300 lbs. Shown on
pages 26 and 76.
Color: Black (BK)
Part #: 901BK
Compatibility: All Anthro Families
See next page for more SpacePal Cart accessories.
Q U I C K
S H I P
Q U I C K
S H I P
94
95
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.