Owner`s manual

10
Important: Be sure that each positive (red) connector on your Strada 2’s is connected
to the corresponding positive (+) speaker output connector on your home theater
receiver or amplifier receiver. If the positive (red) and negative connectors on one of
your speakers are inadvertently switched, that speaker will be out of phase with the
other speakers and the sound will be disembodied.
Setting Speaker Controls at the Receiver or Amplifier
After you have connected your Strada 2's, set the controls for those speakers on the receiver
or amplifier as outlined below:
Control Setting
Speaker Size Small or Normal
Crossover Frequency 80 to 100 Hz on stands
60 to 80 Hz wall mounted
Note: Always follow the instruction manual for your audio visual receiver when
setting speaker controls.
Figure 6. Loudspeaker Connections
Positive (Red)
Negative