Owner manual

56
4. OPERATION continued …
4.13 STATUS DISPLAY
Press, Release, Press to cycle through display screens that show the following:
• Software version, day, and time.
• Audio Input: Bit rate / sample rate of digital source, or Analog.
• Input Format: Channels in the source.
• Audio Output: Bit rate / sample rate mode of the digital to analog converters.
• Output Format: Channels producing output.
• Mode: Surround mode (section 4.8).
• DD/DTS 5.1 Dynamics: Normal, Reduced, or Late Night (section 4.8.10).
• Tone Controls: Enabled, Bypassed, or N/A (section 4.7).
• Sleep Mode: Enabled or Disabled (section 4.11).
• All Timers: Enabled or Disabled (sections 3.1 and 4.12).
• Serial Number: If the number on the rear panel does not match this, contact Anthem immediately.
When in ZONE2 or ZONE3, information relating only to the selected Path is displayed.
S
T
A
T
U
S
SELECT