Specifications

LINE 1 TECHNICAL SPECIFICATIONS
Frequency Response 2 Hz to 250 kHz - 0.5 dB
> 500 kHz -3.0 dB at 2V RMS output
THD & N < 0.01% from 20 Hz to 20 kHz Balanced
< 0.01% Unbalanced (single-ended)
Output at 2V RMS
Gain 18 dB @ 1 kHz (balanced)
12 dB @ 1 kHz (single-ended/unbalanced)
Input Impedance 21k ohms - balanced
Output Impedance 300 ohms balanced output
150 ohms single-ended (unbalanced)
Maximum Input 8.0 VRMS maximum (balanced)
4.0 VRMS (single-ended/unbalanced)
Rated Output 2 VRMS (balanced)
1 VRMS (single-ended/unbalanced)
Maximum Output 56 VRMS at 1% THD (balanced output)
V o l t a g e
Noise < 50µV unweighted wideband noise*
Approx. 25µV IHF A-weighted noise (balanced)
-98 dB A-weighted below a 2 VRMS output
Stereo Separation > -100 dB @ 1kHz relative to 2V RMS output
(Crosstalk)
Tube Complement 6 - 6922 (6DJ8 types)
Fuse Requirements (1) 1.0 A slow-blo (110-120VAC countries)
.5A slow-blo (220-240VAC countries)
Power Requirements 80VA Operate
40VA Standby
Dimensions 19” Wide x 14.25” Deep x 4.5” High
(each chassis) (48 cm x 36 cm x 11.5 cm)
Net Weight Approx. 24 lbs (11 kg) - unpacked
Relay Trigger 30ma AC or DC
(Contacts) 30V max. isolated from chassis via
3.5 mm stereo jack
Infra Red Jack Maximum input voltage 12Vp-p
3.5 mm stereo jack
14
LINE 2 TECHNICAL SPECIFICATIONS
Frequency Response 2 Hz to 250 kHz - 0.5 dB
> 500 kHz -3.0 dB at 2V RMS output
THD & N < 0.01% from 20 Hz to 20 kHz Balanced
< 0.01% Unbalanced (single-ended)
Output at 2V RMS
Gain 18 dB @ 1 kHz (balanced)
12 dB @ 1 kHz (single-ended/unbalanced)
Input Impedance 21k ohms - balanced
Output Impedance 270 ohms balanced output
135 ohms single-ended (unbalanced)
Maximum Input 8.0 VRMS maximum (balanced)
4.0 VRMS (single-ended/unbalanced)
Rated Output 2 VRMS (balanced)
1 VRMS (single-ended/unbalanced)
Maximum Output 56 VRMS at 1% THD (balanced output)
V o l t a g e
Noise < 50µV unweighted wideband noise*
Approx. 25µV IHF A-weighted noise (balanced)
-99 dB A-weighted below a 2 VRMS output
Stereo Separation > -100 dB @ 1kHz relative to 2V RMS output
(Crosstalk)
Tube Complement 6 - 6922 (6DJ8 types)
Fuse Requirements (1) 1.0 A slow-blo (110-120VAC countries)
.5A slow-blo (220-240VAC countries)
Power Requirements 80VA Operate
40VA Standby
Dimensions 19” Wide x 14.25” Deep x 4.5” High
(each chassis) (48 cm x 36 cm x 11.5 cm)
Net Weight Approx. 33 lbs (15 kg) - unpacked
Relay Trigger 30ma AC or DC
(Contacts) 30V max. isolated from chassis via
3.5 mm stereo jack
Infra Red Jack Maximum input voltage 12Vp-p
3.5 mm stereo jack
TECHNICAL SPECIFICATIONS