Specifications

FM/AM Tuner
The TLP 1’s superb-sounding built-in tuner features 18 FM and 6 AM
station presets with selectable Stereo, High-Blend and Mono modes.
For added convenience these modes are memorized to the presets —
simply set it once to enjoy the “best” sound all of the time.
The TLP 1’s High-Blend is a superb alternative to Mono, dramatically
decreasing the high-frequency noise of a weak stereo signal, while main-
taining full stereo sound through the critical midrange.
Record with Independent Source Selection
Main and Record outputs are completely independent, allowing you to
select a different source for each output simultaneously. So, while you
are listening to your usual FM radio station counting down the hits on a
Saturday morning, you can make a recording of your favorite CD to play
in the car.
Match Source Levels
Want each of your components to play at a similar level when you switch
from source to source (i.e. FM/AM to Tape, to CD, to TV, etc.), so that you
don’t have to reach for the volume each time you switch? The TLP 1 lets
you make independent input level-trim adjustments for each source in
order to bring these otherwise bothersome differences to the same level.
Three-Level Display
The front panel LCD display offers an adjustable brightness control, making
it easy to see the display during the day and allowing you to dim it in the
evening. When dimmed, it will brighten momentarily whenever a button is
pressed or volume is changed.
Universal Remote Control
The TLP 1’s intuitive, logically laid out Remote Control not only gives you
command of the TLP 1, but also over your TV, DVD-player or VCR, satellite
receiver or cable converter. The rear-panel IR input jack allows you to
use an IR repeater (not supplied) to control the TLP 1 from another room
—as, for example, in Zone 2 operation.
A universal library of built-in codes gives the
TLP 1’s Remote Control tremendous flexibility.
Use it with hundreds of components—VCRs,
TV-VCR combinations, cable converters, satel-
lite/DBS receivers, DVD-players and laserdiscs
—from various manufacturers.
Trigger Output
A trigger output makes it easy to automate your music listening system.
If your other components, including your power amplifier, have provisions
for a trigger input, you can automatically turn them on or off with a push
of the TLP 1’s Power button or Remote Control. Simply connect the Relay
Trigger output from the TLP 1 to the trigger input of your power amplifier,
TV, CD, etc.
Zone 2 Operation
For your convenience, along with the Record output, the TLP 1 provides
a concurrent fixed-level Zone 2 output. For Zone 2 operation simply connect
this output to an integrated amplifier or stereo receiver.
Superb Headphone Amplifier
Terrific for late-night listening when you don’t want to disturb the family.
Serious listening is always a pleasure with the TLP 1’s built-in high-end
headphone amplifier.
TLP 1
29