Specifications

CONTROL AND CONNECTION FUNCTIONS

F R O N T P A N E L

A - Input Buttons (6 - COAX-RCA, AES/EBU, OPT-ST,

COAX-BNC, OPT-TOS, I

S • e )

These buttons will select an input signal connected

to one of the six Inputs on the rear of the Processor 3. When

selected, the Display Window will light the selected input.

B - Phase Button - This button allows the user to invert the

system phase polarity by 180˚ (relative to the input signal) easi-

ly and safely. Depending upon the methods used in

producing the recording, the user may prefer listening to a

given recording in either phase position.

C - Display Button - The Display button controls the light inten-

sity of the display window. There are four levels of light inten-

sity available plus OFF. Pressing the DISPLAY button will scroll

through all levels.

D - Standby Button - When the unit is first turned on via the

power switch (R) on the rear of the power supply, it will auto-

matically enter STANDBY mode. This will be indicated by

three dots in the display window. Pressing the Standby button

(D) will put the processor in OPERATE mode, after a a 20 sec-

ond warmup interval. (See Powering On & Startup

Procedures, on pg. 7 for more details.)

In STANDBY mode, power is still supplied to the tube filaments,

but the high voltage power supplies for the audio circuitry are

not yet on.

Display Window - The Display window gives the operat-

ing status of the Processor. There are four levels of light intensi-

ty available plus OFF.