Specifications
PLACEMENT FOR PROPER VENTILAT I O N
Allow at least 4” (15 cm) of clear space above the Pre 1
chassis for proper ventilation, making sure the air vent slots
in the chassis cover remain unobstructed. Also, be sure
that the Pre 1 is placed on a secure, hard and level surface.
SAFETY INSTRUCTIONS
1. Ventilation - Although your Pre 1 generates only nominal
heat in use, be sure that the ventilation slots in the top cover
have at least 4” of unobstructed air space above them.
2. Water and Moisture - This product should not be used
near water. To prevent fire or shock hazard, do not expose
this product to rain or moisture.
3. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances which produce heat.
4. Power Sources - This product should be connected to an
AC power source of the proper rated voltage. The original
shipping container will stipulate the AC voltage this unit can
operate with correctly.
5. Cleaning - A regular dusting with a soft, non-abrasive
cloth will generally keep the finish of the faceplate and chas-
sis looking like new. At no time should you allow any liquid to
come in contact with the Pre 1; it may run into the electronic
circuitry and cause damage which will not be covered under
your warranty.
6. Servicing - Do not open this product. No user serviceable
parts inside. Refer servicing to an authorized service technician.
7. Non-Use Periods - The power cord of this product should
be unplugged from the outlet when left unused for an
extended period of time.
8. Do not remove the Pre 1 covers while the unit is “on”, or
connected to an AC power source. Cover screws could fall
through the ventilation slots and cause electrical damage to
the Pre 1.
PACKING MAT E R I A L S
Please retain all of the packing material and shipping boxes
for your Pre 1. They are custom designed to prevent ship-
ping damage from occurring. Sonic Frontiers, Inc. will
accept no responsibility for any damage occurring to a Pre 1
that is shipped in packing material other than the original
Sonic Frontiers packing material.
DISCLAIMER OF LIABILITY
Under no circumstances does Sonic Frontiers, Inc.
assume liability or responsibility for injury or damages sus-
tained in the use or operation of this equipment or for
damages to any other equipment connected to it.
Sonic Frontiers, Inc. reserves the right to make design
changes or improvements without the obligation to revise
prior versions. All specifications are subject to change
without notice.
LIMITED FIVE YEAR WA R R A N T Y
Sonic Frontiers, Inc. warrants to the purchaser that each
Pre 1 is free of manufacturing defects for a period of five
(5) years from the date of purchase. This five (5) year lim-
ited non-transferable warranty excludes all vacuum tubes,
which we warrant for a period of twelve (12) months. To
receive this warranty, the original purchaser must com-
plete and mail to Sonic Frontiers, within thirty (30) days
from the date of purchase, the enclosed Warranty
Registration Card. Sonic Frontiers, Inc. will then validate
the warranty to the original purchaser. This warranty is
subject to the following conditions and limitations:
1
. Warranty applies only to the original purchaser.
2. This warranty is void and inapplicable if the product has
been handled other than in accordance with the instruc-
tions in this Owner’s Manual, abused or misused, dam-
aged by accident or neglect or in being transported, or the
defect is due to the product being tampered with, modi-
fied or repaired by anyone other than Sonic Frontiers, Inc.
or an authorized Sonic Frontiers repair depot.
3. Warranty does not cover normal maintenance.
4. Sonic Frontiers, Inc. shall not be responsible in any way
for consequential or indirect damages or liabilities resulting
from the use and operation of the product covered herein
or resulting from any breach of this warranty or any
implied warranty relating to said product.
During this period, Sonic Frontiers, Inc. will repair or
replace any defective components free of charge. A
Return Authorization Number (RA Number) is required