Specifications

BREAK-IN TIME
As with all audio electronic products, the ultimate sonic
character of the Integrated 1 will not be realized until and
unless the unit receives a minimum of approximately 70
hours of signal break-in time (i.e. the Integrated 1 is on
and outputting a signal).
PLACEMENT FOR PROPER VENTILAT I O N
Allow at least 4” (15 cm) of clear space above the
Integrated 1 chassis for proper ventilation, making sure the
air vent slots in the chassis cover remain unobstructed.
Also, be sure that the Integrated 1 is placed on a secure,
hard and level surface (not on carpet).
SAFETY INSTRUCTIONS
1. Ventilation - Although your Integrated 1 generates only nomi-
nal heat in use, be sure that the ventilation slots in the top
cover have at least 4” of unobstructed air space above them.
2. Water and Moisture - This product should not be used
near water. To prevent fire or shock hazard, do not expose
this product to rain or moisture.
3. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances which produce heat.
4. Power Sources - This product should be connected to an
AC power source of the proper rated voltage. The original
shipping container will stipulate the AC voltage this unit can
operate with correctly.
5. Cleaning - A regular dusting with a soft, non-abrasive
cloth will generally keep the finish of the faceplate and chas-
sis looking like new. At no time should you allow any liquid to
come in contact with the Integrated 1; it may run into the
electronic circuitry and cause damage which will not be cov-
ered under your warranty.
6. Servicing - Do not open this product. No user serviceable
parts inside. Refer servicing to an authorized service technician.
7. Non-Use Periods - The power cord of this product should
be unplugged from the outlet when left unused for an
extended period of time.
8. Do not remove the Integrated 1 covers while the unit is
“on”, or connected to an AC power source. Cover screws
could fall through the ventilation slots and cause electrical
damage to the Integrated 1.
PACKING MAT E R I A L S
Please retain all of the packing material and shipping boxes
for your Integrated 1. They are custom designed to prevent
shipping damage from occurring. Sonic Frontiers, Inc. will
accept no responsibility for any damage occurring to an
Integrated 1 that is shipped in packing material other than
the original Sonic Frontiers packing material.
DISCLAIMER OF LIABILITY
Under no circumstances does Sonic Frontiers, Inc.
assume liability or responsibility for injury or damages
sustained in the use or operation of this equipment or for
damages to any other equipment connected to it.
Sonic Frontiers, Inc. reserves the right to make design
changes or improvements without the obligation to revise
prior versions. All specifications are subject to change
without notice.
LIMITED FIVE YEAR WA R R A N T Y
Sonic Frontiers, Inc. warrants to the purchaser that each
Integrated 1 is free of manufacturing defects for a period
of five (5) years from the date of purchase. This five (5)
year limited non-transferable warranty excludes all vacuum
tubes, which we warrant for a period of twelve (12)
months. To receive this warranty, the original purchaser
must complete and mail to Sonic Frontiers, within thirty
(30) days from the date of purchase, the enclosed
Warranty Registration Card. Sonic Frontiers, Inc. will then
validate the warranty to the original purchaser. This war-
ranty is subject to the following conditions and limitations:
1 . Warranty applies only to the original purchaser.
2. This warranty is void and inapplicable if the product has
been handled other than in accordance with the instruc-
tions in this Operating Manual, abused or misused, dam-
aged by accident, neglect or in being transported, or the
defect is due to the product being tampered with, modi-
fied or repaired by anyone other than Sonic Frontiers, Inc.
or an authorized Sonic Frontiers repair depot.
3. Warranty does not cover normal maintenance.