Owner`s manual

XM-100 Commercial Satellite Audio Receiver 19
Skip ###? N
PWR Toggles
In the course of using the XM-100 you may find that there are
specific channels you prefer not to listen to and would rather
skip over. Using XM-100’s SKIP feature, you can program the
unit to skip over these channels when scrolling using the
up/down buttons or remote control. (Note that you can still
access the “skipped” channels using the direct tune method.)
To configure a channel to be skipped when scrolling:
• Use the up/down buttons to scroll to the channel you want
to skip (or add back a currently skipped channel).
• Use the POWER button to toggle the status between
skipped “Y” or not skipped “N”. “B” indicates the channel is
blocked, and therefore will automatically be skipped.
• Add and Skip as many channels as you prefer. When
finished, press the MODE button to return to the SETUP
display.
Forced Tuning
When Setup – Forced Tuning is displayed, pressing the Mode
button brings up the following sub menu structure:
Force Tuning
by Day&Time
Force Tuning
by Time
Force Tuning
by Channel
Force Tuning
Add New
Force Tuning
by Day&Time
Force Tuning
by Time
Force Tuning
by Channel
Force Tuning
Add New