Installation guide

Last revision 12/00 5
SX-23e
There are 7 external connectors on the SX-23e. See Figure 6.
Audio Input:
Line:
Balanced - Nine pin D connector 0 to +26dBu (digital clipping) - software selectable with
1dBu resolution, with an impedance of 20k ohms
Unbalanced - 1/8” stereo mini jack 2VRMS/+6dBV max (digital clipping), with an impedance
of 20k ohms and a load impedance of 10k ohms
AES/EBU Digital:
7 pin Mini DIN jack. Professional AES/EBU: EIAJ CP-340 Type I / IEC-958 Pro or
Consumer S/PDIF: EIAJ CP-340 Type II / IEC-958 Consumer
Audio Output
Line:
Balanced - Nine pin D connector 0 to +26dBu(digital clipping) - software selectable with an
impedance of 50 ohms and a load impedance of 600 ohms or greater.
Unbalanced - 1/8” stereo mini jack 2VRMS/+6dBV max (digital clipping), with an
impedance of 470 ohms and a load impedance of 10k ohms
Headphone :
1/4" stereo phone jack, 0.5 VRMS into 600 ohms or greater.
AES/EBU Digital:
7 pin Mini DIN jack. Professional AES/EBU: EIAJ CP-340 Type I / IEC-958 Pro or
Consumer S/PDIF: EIAJ CP-340 Type II / IEC-958 Consumer
Headphones
Adapter # jumper block
Balanced I/O
Digital AES/EBU I/O
SX-23e
Balanced Analog Header
Digital Header
Unbalanced In
Unbalanced Out
Figure 6: SX- 23e Connector Locations