Installation guide

Last revision. 12/00
3
2
RapidFire Time Announcements
Using the RapidFire Time Announcements requires two things:
1)
Scheduling the Time Announcement
2)
Recording the Proper Audio File Number(s)
Scheduling
Create the Music Plus Member HD999-90 with a length of 5 seconds. Schedule it in music or break
format so that it will appear in your playlist.
Recording
The 70000 series of audio file numbers has been reserved for time announce files. The audio file
numbering scheme is as follows:
SP7HHMM.SPC, where HH is the hour (in military time 00-23)
and MM is the minute (00-59)
TIP:
It is a good idea to record time announce files +/- 3 minutes around the time that you expect them
to be scheduled. For example, to schedule a time announcement at 2:30 p.m., record the audio files
numbers: SP71427.SPC through SP71433.SPC (this covers for a +/- a 3 minute time window).
Examples:
PlayList Time Time File that will play
1:30 a.m. SP70130.SPC
5:15 a.m. SP70515.SPC
11:30 a.m. SP71130.SPC
2:30 p.m. SP71430.SPC
9:45 p.m. SP72145.SPC
NOTE:
If the audio file for a time announcement does not exist, the system will play SP99990.SPC