Installation guide

Last revision. 12/00
3
0
RapidFire Drop Box Editor
The RapidFire Drop Box editor allows you to set up jock profiles along with the necessary drops to make
their shows sound great. Refer to RapidFire Drop Box Editor Manual.
RapidFire Quick Keys
Esc - Toggles between Live Mode and Auto Mode .
F1 - Play button for Player 1 F5 - Stop button for Player 1
F2 - Play button for Player 2 F6 - Stop button for Player 2
F3 - Play button for Player 3 F7 - Stop button for Player 3
F4 - Play button for Player 4 F8 - Stop button for Player 4
F10 - Exit RapidFire
RapidFire Time Update
You can now update the clock within RapidFire to keep your clock in sync with real-time. Click on the
in the Selection Section and adjust the clock using the arrows above and below the time display.
RapidFire Satellite Time Synchronization
What is it?
RapidFire will keep your clock in sync with a satellite’s clock, if your satellite signal provides tones.
How to use it
A contact closure must be established between Pin 18 and Pin 34 on the STA-U (see hardware section
page 9) from either a tone decoder or “intelligent” satellite receiver. The rapid.ini file in the \rapid
directory must also be configured for time synching to occur properly. The three lines of the file
associated with time synching options are located near the end of the file. The first line could have a
setting of either 1 or 0( 1 being active and 0 being inactive). The next option provides for the minutes
that the closure will sync to, and the last option provides for the second’s element of the time sync. For
example, if you wanted to time sync at the top of every hour, the value for the first line of the three
would be 1 and the last two items would be 0.