Installation guide

Last revision. 12/00
2
1
✔
Bringing the Active Event (the event set to play next) in the current hour playlist to the top
of the list
After scrolling through the playlist, often people lose their place and wonder what is going to play next.
With the
(Home)
option the item which is going to play next will automatically be updated to the top
of the Playlist Display.
✔
Resetting the Active Event in the current playlist hour
The Reset command
is the same as telling the playlist where to begin in the playlist. To use the
option, simply click on the Reset icon
and then click on which song you would like to set as the next
event. The Auto-Load command
in each of the players would now be pointed to the new item
selected by the Reset command.
Example:
To go to the sixth event on the playlist rather than start playing it from the top, click
;
then click the sixth event. The item is now designated as the first event to play next in Auto-Load or
Auto Mode. To double check, click the Home icon
and the sixth event should be highlighted in blue and
at the top of the playlist display.
✔
Inserting an Audio Event in current hour playlist
In order to add new events to the playlist while on the air, they must be inserted using the Insert icon
.
First click on the Insert icon, then decide what new event to add. The choices for addition are found on
the Selection Section Area. From the Selection Section, you can choose either
, , , , , , icons. From there, the Quick Pick Screens will
be activated. Each button will activate the corresponding Quick Pick Screen according to their headings.
When in the appropriate Quick Pick Screen, an event may be chosen to be inserted as follows:
Example:
To add Toto by Africa to the current hour playlist
1)
Click
2)
Click
3) Click to choose this item
4) Click to insert the event into the playlist
5) Choose a place in the playlist to add
the event and click on the area.
3) Click here to
c
hoose this item.