Installation guide

Last revision. 12/00
1
6
✔
Loading an item from the Quick Pick Screens
icons will bring up the
Quick Pick Screens
when activated. Each
button will activate the corresponding
Quick Pick Screen
according to their headings. Once in a Quick
Pick screen, simply click on the load control of the player you wish to load the item into, then click on
the item you wish to load, and it should appear in the player display.
Example:
✔
Ending a Hard Disk Audio Item
There are three ways to end the play of a Hard Disk Audio Item:
1) to simply let it finish playing
2) to stop it manually, and
3) to fade out of it.
To stop it manually, simply click on the Stop button of the player which the item is playing on. To fade
out of an item, first set fade adjustments to 5 if using a Pentium 133. To set the fade level, click on the
arrow to the left of level display of the player which is about to fade. Then click on the Fade button and
the song should fade out according to the fade level set. The level number set indicates how tight a fade
is. The lower the number, the tighter the fade, thus the higher the number, the longer the fade.
Example:
For a tight fade out of a song—set fade level to 2 by clicking on the right arrow of the fade
level adjuster
. Then simply hit the fade button.
F
ade Button
1) Click the Music icon to bring up the
music listings. This button brings you
to the Music Quick Pick Screen
.
2) Click to put the player
i
n load mode.
3) Then click here to
load this song