Installation guide

Last revision 12/00 9
The following is what a typical RapidFire
play.bat
should look like:
C:\AUDIODRV\SX25 /U (OR SX-34 DRIVER)
C:\MOUSE\MSCMOUSE /A4 /1
C:\AUDIODRV\SX25 /B32 /B32 /B32 /B32 (OR SX-34 DRIVER)
RAPID
C:\AUDIODRV\SX25 /U (OR SX-34 DRIVER)
C:\MOUSE\MSCMOUSE /U
The
RAPID.INI
file and settings:
AudioBaseAddressCard1 = 1 iIOAdd1
1 = 180 4 = 220
2 = 280 5 = 300
3 = 380 6 = 320
AudioInterruptCard1 = 3 iInter1 2,3,4,5,10,11,12
AudioBaseAddressCard2 = 2 iIOAdd2
1 = 180 4 = 220
2 = 280 5 = 300
3 = 380 6 = 320
AudioInterruptCard2 = 5 iInter2 2,3,4,5,10,11,12
AudioBaseAddressCard3 = 0 iIOAdd3 0 = No Card
1 = 180 4 = 220
2 = 280 5 = 300
3 = 380 6 = 320
AudioInterruptCard3 = 0 iInter3 0,2,3,4,5,10,11,12
AudioSampleRate = 1 iSR1 1 = 48000
2 = 44100
3 = 32000
AudioFormat = 1 iTWFormat 1 = MPEG
2 = DOLBY-AC2
AudioChannels = 2 iNoChannels 1 = MONO
2 = STEREO
AutoBreakMinutesDefault = 59 iABreaksMM
AutoBreakSecondsDefault = 00 iABreaksSS
AutoBreakTypeDefault = A cABreaksTp A = -GO-END
B = -GO-TOP NO FADE
C = -GO-TOP WITH FADE