User Manual
⦁ Check the routing on the control panel. Have you routed the signal path correctly?
⦁ If you have routed signals to the routing mixer, check their corresponding fader is up.
⦁ Check the relevant peak meters of the control panel by selecting them in the drop down menu to see if the
relevant signal is being received or is being outputted.
DAW
What buer size is your DAW set to?
⦁ If it’s signicantly low, i.e. lower than 128 samples, try increasing it from the Discrete 8 control panel (Windows-
only).
⦁ Is the input and output routing correct in your DAW? Is the Discrete 8 device selected in the relevant sound card
section of your DAW’s preferences?
⦁ If the Discrete 8 doesn’t show up in your DAW, try unplugging and plugging back the USB 2.0 cable. Then, try
restarting your computer. Finally, try re-installing the rmware, drivers and control panel.
9. Technical Specications
ANALOG
Analog Inputs
6 x Mic / Line Inputs