User Manual
8. Troubleshooting
START UP AND SOUND ISSUES
Are you running the latest control panel and driver?
If not, please update your control panel and rmware.
Are you correctly routing the audio signal via the routing panel?
To hear playback, route the Computer Play channels to the Discrete 8 main outputs.
Have you set the correct sample rates?
On a Mac, rst check that the sample rate is correct in the Audio & Midi set-up panel. Proceed to check in the DAW
and nally, check the Discrete 8 sample rate. Everything should match.
For Windows, go to Playback Devices, right-click on Discrete 8, then click Properties. Move to the Advanced tab and
select the correct sample rate. Proceed to check in the DAW and nally, check the Discrete 8 sample rate.
Everything should match.
If you believe there is no sound being routed to an input or delivered from an output:
⦁ Check your source. Is there a signal being transmitted from the source? Is your source in the correct sample rate
for the Discrete 8 to receive?
⦁ Check what clocking mode you are in.
⦁ Are you receiving clock signal from the source?
⦁ Check that the relevant lock light on the control panel of the Discrete 8 is lit.
⦁ Try a dierent cable and another source if available.