User Manual

Orion Studio Synergy Core User Manual 44
Mixer tab
The Mixer tab is home to four 32-channel software mixers. Each channel is equipped with
Pan, Volume, Solo, and Link controls (on odd-numbered channels), as well as metering.
The Master channel has Volume and Mute controls.
Note the colored sliders above and below the Master fader. Drag it left and right to scroll
horizontally between mixer channels 1 – 32.
Limitations
● There is no grouping/bus/sub-mixing functionality, but the four full-fledged mixers
give plenty of space to set up sub-mixes (e.g. drum bus, artist headphones)
alongside your main mix.
● Due to technical reasons, we cannot offer volume automation inside the mixers at
this time. Synergy Core FX automation is possible in your DAW with AFX2DAW.
● MIDI control is not supported.
Mixer 1 has AuraVerb available as a Send effect for monitoring purposes. Turn the Send
knob on an audio channel to hear the reverb. The mixers are otherwise identical.