User Manual

Orion Studio Synergy Core User Manual 24
Rear panel explained
10. DC POWER CONNECTION
For use with the Antelope DC power supply unit only!
11. USB HIGH-SPEED
USB 2.0 Type-B port. Supports up to 24 I/O audio channels.
12. THUNDERBOLT™ 3 PORT
Thunderbolt™ 3 Type-C port. Supports up to 32 I/O audio channels.
13. ADAT I/O
2 inputs and 2 outputs carrying up to 16 I/O audio channels over Toslink fiber optic cables.
Note that
ADAT runs on S/MUX. Standard ADAT audio limits apply:
● Up to 16 I/O channels of 24-bit, 48kHz audio.
● Up to 8 I/O channels of 24-bit, 96kHz audio (over S/MUX).
● Up to 4 I/O channels of 24-bit, 192kHz audio (over S/MUX).
● All ADAT audio is transmitted in 24-bit resolution.
Note: Devices do not need to be powered off for connecting or disconnecting ADAT.
However, you should mute the receiving equipment because a large signal spike will
occur upon connecting.
14. D-SUB 25-PIN LINE OUTPUTS
Two DB-25 breakout cable connectors carrying 8 audio channels each (16 channels in
total). Compatible with TASCAM Standard Pin Layout.
15. MONITOR OUTPUTS (MONITOR A AND MONITOR B)
Two pairs of assignable unbalanced stereo outputs (L/R) on four 1/4-inch mono TRS
jacks.
Note: All analog outputs are impedance-balanced. The monitor outputs, however, are
signal-balanced.