User Manual

Orion Studio Synergy Core User Manual 20
● Press to quickly mute or un-mute the outputs.
5. GAIN, HP & A/B BUTTONS
● Press the Gain button to adjust gain for all 12 Preamp/Combo inputs. Turn the
rotary control to select the input and press to confirm. Turn to adjust gain (in dB).
Press again to confirm. Press the Gain button to exit.
● Press the HP button to cycle through Headphone outputs 1 & 2 and adjust their
volume with the rotary control. Press again to exit.
● Press the A/B button to cycle through monitor outputs A & B and adjust their
volume from the rotary control.
Note: It is possible to hear output from monitor outputs A & B simultaneously
(concurrent monitoring). The relevant functionality is inside the software Control
Panel.
6. DISPLAY
The display shows various information, such as peak metering, menu options, and
firmware update progress.
Note: There might be a protective film over the display which dims the illumination. Feel
free to remove it.
7. FUNCTION BUTTONS
The three function buttons offer different functionality.
The Top button does the following:
● Press - and keep pressing (without holding) - to view current gain values and
assignments (Mic/Line/Hi-Z/Direct) for Preamp/Combo inputs 1 to 4, 5 to 8, 9
to 12. The penultimate press shows the current clock source and device sample
rate. The final press returns to peak metering and restarts the ‘cycle’.
● Press-and-hold to enter the System Menu.
System menu
Pressing and holding the Top function button enters the System Menu with the following
sub-menus. Turn the rotary control to navigate. Press the rotary control to enter. Press
and hold the rotary control to confirm. Press any of the function buttons to exit.