User Manual

Orion Studio Synergy Core User Manual 9
4. Enter the ‘Enhancements’ tab and disable all enhancements.
5. Enter the ‘Advanced’ tab and choose any of the available “2 channel, 24-bit” modes
from the drop-down menu. Click ‘OK’ to close the window.
6. Back in Sound settings, click 'Device Properties' under 'Input'. Then, click 'Additional
Device Properties'. Enter the 'Enhancements' tab and disable all enhancements. Click 'OK'
to close the window.
Tips
● If you are experiencing interruptions or failure when using your DAW and trying to
playback audio from your OS at the same time, make sure that the device sample
rate matches the one of your DAW session.
● You can disable the device and enable it again from the ‘Playback’ tab to refresh
the driver. This will be similar to disconnecting and re-connecting your device, which
makes Windows reset the playback configuration of the applications you are using.