User Manual

• Meters per channel, displaying peak value of the low-passed signals.
LFE channel settings
Control over the following settings of the LFE’s low pass filter:
• Cutoff frequency.
• Filter type switch, choice between Linkwitz-Riley and Butterworth filters.
• Filter order (2nd, 4th, 8th).
• Filter bypass for each channel, with linking.
• Separate volume control fader for the LFE channel’s output signal.
• Level meter for the LFE output signal.
• Mute and solo functionality.
Additional notes
• For setups that include more than one subwoofer (e.g., 9.3.6), sending the LFE
output channel to multiple outputs in parallel is easily achieved via the routing
matrix.
• Chaining channels for additional delay time is possible, if the allocated 100ms per
channel are not enough. Of course, this would mean sacrificing one of the 16
available channels.