User Manual

• channel output (coral orange - L, C, R; green - surround speakers; blue – overhead
speakers) - represents the signal being sent to the output.
• channel EQ settings graph (teal) - represents the currently dialed EQ settings.
• LFE split signal (purple) - represents the signal split and sent to the LFE channel via
its bass management crossover mixer. The graph shows the low-pass filter applied
to the channel.
• crossover high-pass filter graph (yellow) - represents the high-pass filter settings
applied to the channel, also available via the LFE's mixer window.
LFE channel and bass management crossover filter settings
With the LFE channel selected, the crossover settings appear above the EQ graph. Also,
the crossover filter settings switch to the low-pass filter of the LFE channel instead.
• LFE CROSSOVER – Opens the bass management mixer window (explained below).
• CROSSOVER ON/OFF – Enables/disables all crossover filters.