User Manual

sources with a lot of high frequency content. Generally, as the size of the space increases,
the Reverb Time will also increase.
Setting Reverb Time to 50% gives a natural sounding tail for all room sizes. Interesting big
spaces or subtle ambience reverbs can be created by setting Reverb Time unusually high or
low with respect to the Room Size parameter.
Room Size
Room Size increases the virtual space dimensions
Reverb Level
This is the output level control of the reverb. Since inputs for AuraVerb are assigned to
Send knobs on Mixer 1’s channels, we recommend balancing the channel volume levels
from the Send controls and using Reverb Level to adjust the amount of reverb in the
Master bus.
REVERB FX ON/OFF Switch
Use it to enable and disable AuraVerb.