User Manual

'MIXER' view
The Mixer tab is home to four 32-channel virtual mixers. Each channel is equipped with
Pan, Volume, Solo, and Link controls (on odd-numbered channels), as well as metering.
The Master channel has Volume and Mute controls.
Note the colored slider immediately below the Master fader. Click and drag left and right to
scroll the entirety of the mixer horizontally.
Limitations
● There is no grouping/bus/sub-mixing functionality, but the four full-fledged mixers
give plenty of space to set up sub-mixes alongside your main mix.
● Due to technical reasons, we cannot offer volume automation inside the mixers at
this time. Synergy Core FX automation is possible in your DAW with AFX2DAW.
● MIDI control is not supported.
Mixer 1 is home to the AuraVerb send effect, explained below.
AuraVerb
AuraVerb provides richness and color using a special new approach and a unique algorithm.
The reverb features eight different controls, including a ‘Color’ parameter to create
everything between darkened textures to bright, sizzling presence. In addition, there are 24
presets done by award-winning audio engineer and producer Brian Vibberts.
AuraVerb is a Send effect designed for live performance and monitoring. Turn the 'Send'
knob on a mixer channel to hear the reverb applied to it.