User Manual

This row represents 32 audio channels with Synergy Core FX applied.
MIX 1-4 L/R
This row represents main outputs 1 and 2 of virtual mixers 1 to 4. The 4 virtual mixers are
found in the 'MIXER' view.
MIC OUT 1-8
This row represents the available output channels of the microphone emulation processing.
SURROUND OUT 1-16
This row represents the outputs of the Surround tab’s processing.
'OUTPUT' SECTION
LINE OUT 1-32
These rows represent the 32 line outputs.
MONITOR
This row represents 2-channel monitor output audio.
DAW IN 1-32, 33-64
This row represents DAW Inputs 1 – 64. This is where you send audio to be inputted and
recorded into your DAW via the Thunderbolt connection. To record from a ‘DAW IN’ device
output, route audio to it from the ‘Routing’ tab. Create a new track in your DAW and assign
the input with the matching number - e.g. 'DAW IN' 1 = DAW 'Input 1'.
DANTE OUT 1-32, 33-64
These rows represent 64 channels of outgoing Dante® network audio.
MADI OUT 1-32, 33-64
These rows represent 64 channels of outgoing MADI digital audio.
HDX OUT 1-32, 33-64
These rows represent 64 channels of outgoing HDX digital audio.
MIC IN 1-8
This row represents the available input channels for microphone emulation processing.
SURROUND IN 1-16
This row represents the inputs of the Surround tab’s processing.