User Manual

PANNING LAW
Specify panning law compensation between 0dB (none) to -4.5dB.
TRIM MONITOR - Click the drop-down menu to choose an audio signal trim value for the
monitor outputs (17dBu - 22dBu). By default, this option is set to 22dBu. Trim can be used
to compensate for the perceived volume differences between two or more sets of
speakers so that they produce the same perceived volume level.
OSCILLATOR 1 - MUTE
Mute the output of test oscillator 1.
OSCILLATOR 1
Choose the frequency of test oscillator 1.
OSCILLATOR 2
Choose the frequency of test oscillator 2.
OSCILLATOR 2 - MUTE
Mute the output of test oscillator 2.
TB LATENCY MODE
Choose the Thunderbolt™ latency mode. Experiment with the different modes if you
experience audio interruptions and glitching.
BRIGHTNESS SLIDER
Click and drag to adjust the brightness of the Galaxy 32 Synergy Core's dual display
screens.
DC COUPLED INPUTS
Click to enable DC-coupling for the Galaxy 32 Synergy Core line inputs.
S-MUX
Toggle S-MUX for the MADI and ADAT digital inputs and outputs.